Threaded Mode | Linear Mode

Nightshark · 11-10-2007 11:14 PM

also dovecot ersetzt postfix...

Und das geht ganz leicht? weil ich hab jetzt da schon einige Adressen gemacht und so... :o

Und funktioniert damit auch n update? Und SSL is dann leichter? *fragen über fragen*

Wenn wir schon dabei sind:
*notizblock hervorhol*:
- Ordner können von kunden über FTP nicht gelöscht werden
- subdomains -> keine links auf http:// seiten
- autoindexdateien funktionieren nicht obwohl eingetragen -> schokhi.ch -> index.html

rbtux · 11-10-2007 11:18 PM

dovecot erseetzt courier und sasl nicht postfix! und ja das geht ganz einfach... siehe howto

**BeNe** · 11-10-2007 11:43 PM

Kann da rbtux nur zustimmen!
Dovecot hat es einfach in sich und die Umstellung ist eigentlich kein act.

Quote:- Ordner können von kunden über FTP nicht gelöscht werden

Was für Ordner ? Welche rechte / user haben die Ordner ?

Quote:- subdomains -> keine links auf http:// seiten

Verstehe ich jetzt nicht so ganz die Frage...

Quote:- autoindexdateien funktionieren nicht obwohl eingetragen -> schokhi.ch -> index.html

Wie und wo hast du was eingetragen ?
--> http://www.isp-control.net/ispcp/wiki/docs/de/htaccess

Greez BeNe

Nightshark · 11-11-2007 12:08 AM

Hmm... gut, hab das How-To durch:

7. Migrating existing Maildirs

If you are using existing maildirs which were accessed by courier you have to migrate the maildirs... this can be done with the courier-dovecot-migrate.pl script from http://wiki.dovecot.org/Migration/Courier

muss ich das script wo bestimmtes hintun? weil er sagt mir immer 0 übernommen

was wahrscheinlich auch der grund is, warum ich mich jetzt für mail.domain.ch authen muss. Und der username jetzt nur noch user und nicht mehr user@domain.ch ist
weil sonst user@domain.ch@mail.domain.ch rauskommt o.o hääh?

rbtux · 11-11-2007 12:11 AM

pack das script nach /var/mail/virtual

und mach courier-dovecot-migrate.pl --recursive

wenn keine fehler kommen machst du:

courier-dovecot-migrate.pl --recursive --convert

rbtux · 11-11-2007 12:12 AM

das zweite problem habe ich nicht so ganz begriffen...

Nightshark · 11-11-2007 12:56 AM

ok erstes weg, ich hab's mit /var/mail/ versucht gehabt... naja fast ne Wink

das 2te:
Ich kann mich nicht mehr einloggen via Thunderbird.

rbtux · 11-11-2007 12:58 AM

postconf -n
master.cf
dovecot.conf

Nightshark · 11-11-2007 03:30 AM

Code:

s136:/var/mail/virtual# postconf -n

alias_database = hash:/etc/aliases

append_at_myorigin = yes

append_dot_mydomain = no

biff = no

broken_sasl_auth_clients = yes

command_directory = /usr/sbin

config_directory = /etc/postfix

daemon_directory = /usr/lib/postfix

inet_interfaces = all

local_destination_recipient_limit = 1

local_recipient_maps = unix:passwd.byname $alias_database

local_transport = local

mail_spool_directory = /var/mail

mailbox_command = procmail -a "$EXTENSION"

mailbox_size_limit = 0

mydestination = $myhostname, $mydomain

mydomain = clan-host.ch

myhostname = clan-host.ch

mynetworks_style = host

myorigin = $mydomain

setgid_group = postdrop

smtp_sasl_type = dovecot

smtpd_banner = $myhostname ISPCP 1.0 Priamos Managed ESMTP 1.0.0 RC2 OMEGA

smtpd_recipient_restrictions = permit_inet_interfaces,                               permit_sasl_authenticated,                               reject_unauth_destination

smtpd_sasl_auth_enable = yes

smtpd_sasl_path = private/auth

smtpd_sasl_security_options = noanonymous

smtpd_sender_restrictions = permit_mynetworks,                               permit_sasl_authenticated,                               reject_unauth_destination

transport_maps = hash:/etc/postfix/ispcp/transport

virtual_alias_maps = hash:/etc/postfix/ispcp/aliases

virtual_gid_maps = static:8

virtual_mailbox_base = /var/mail/virtual

virtual_mailbox_domains = hash:/etc/postfix/ispcp/domains

virtual_mailbox_limit = 0

virtual_mailbox_maps = hash:/etc/postfix/ispcp/mailboxes

virtual_minimum_uid = 5010

virtual_transport = dovecot

virtual_uid_maps = static:5010

s136:/var/mail/virtual#

[/Quote]

master.cf

[Quote]

#

# Postfix master process configuration file.  For details on the format

# of the file, see the master(5) manual page (command: "man 5 master").

#

# ==========================================================================

# service type  private unpriv  chroot  wakeup  maxproc command + args

#               (yes)   (yes)   (yes)   (never) (100)

# ==========================================================================

smtp      inet  n       -       n       -       -       smtpd

#submission inet n       -       -       -       -       smtpd

#  -o smtpd_enforce_tls=yes

#  -o smtpd_sasl_auth_enable=yes

#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject

#smtps     inet  n       -       -       -       -       smtpd

#  -o smtpd_tls_wrappermode=yes

#  -o smtpd_sasl_auth_enable=yes

#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject

# For AOL-Accounts

587       inet  n       -       n       -       -       smtpd

   -o smtpd_client_restrictions=permit_sasl_authenticated,reject_unauth_destinat

ion

#628      inet  n       -       -       -       -       qmqpd

pickup    fifo  n       -       n       60      1       pickup

cleanup   unix  n       -       n       -       0       cleanup

qmgr      fifo  n       -       n       300     1       qmgr

#qmgr     fifo  n       -       -       300     1       oqmgr

tlsmgr    unix  -       -       n       1000?   1       tlsmgr

rewrite   unix  -       -       n       -       -       trivial-rewrite

bounce    unix  -       -       n       -       0       bounce

defer     unix  -       -       n       -       0       bounce

trace     unix  -       -       n       -       0       bounce

verify    unix  -       -       n       -       1       verify

flush     unix  n       -       n       1000?   0       flush

proxymap  unix  -       -       n       -       -       proxymap

smtp      unix  -       -       n       -       -       smtp

# When relaying mail as backup MX, disable fallback_relay to avoid MX loops

relay     unix  -       -       n       -       -       smtp

        -o fallback_relay=

#   -o smtp_helo_timeout=5 -o smtp_connect_timeout=5

showq     unix  n       -       n       -       -       showq

error     unix  -       -       n       -       -       error

discard   unix  -       -       n       -       -       discard

local     unix  -       n       n       -       -       local

virtual   unix  -       n       n       -       -       virtual

lmtp      unix  -       -       n       -       -       lmtp

anvil     unix  -       -       n       -       1       anvil

scache    unix  -       -       n       -       1       scache

# ====================================================================

# ISPCP Ï OMEGA configuration

# ====================================================================

# AMaViS => Antivir / Antispam

amavis    unix  -       -       n       -       2       smtp

   -o smtp_data_done_timeout=1200

   -o smtp_send_xforward_command=yes

   -o disable_dns_lookups=yes

localhost:10025 inet  n -       n       -      -        smtpd

   -o content_filter=

   -o local_recipient_maps=

   -o relay_recipient_maps=

   -o smtpd_restriction_classes=

   -o smtpd_client_restrictions=

   -o smtpd_helo_restrictions=

   -o smtpd_sender_restrictions=

   -o smtpd_recipient_restrictions=permit_mynetworks,reject

   -o smtpd_override_options=no_address_mappings

   -o mynetworks=127.0.0.0/8

   -o strict_rfc821_envelopes=yes

# ISPCP autoresponder

ispcp-arpl unix  -      n       n       -       -       pipe

  flags=O user=vmail argv=/var/www/ispcp/engine/messager/ispcp-arpl-msgr

# TSL - Activate, if TSL is avaiable/used

smtps     inet  n       -       -       -       -       smtpd

   -o smtpd_tls_wrappermode=yes

   -o smtpd_sasl_auth_enable=yes

#   -o smtpd_client_restrictions=permit_sasl_authenticated,reject

#

# ====================================================================

# Interfaces to non-Postfix software. Be sure to examine the manual

# pages of the non-Postfix software to find out what options it wants.

#

# Many of the following services use the Postfix pipe(8) delivery

# agent.  See the pipe(8) man page for information about ${recipient}

# and other message envelope options.

# ====================================================================

#

# maildrop. See the Postfix MAILDROP_README file for details.

# Also specify in main.cf: maildrop_destination_recipient_limit=1

#

maildrop  unix  -       n       n       -       -       pipe

  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}

#

# The Cyrus deliver program has changed incompatibly, multiple times.

#

old-cyrus unix  -       n       n       -       -       pipe

  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}

# Cyrus 2.1.5 (Amos Gouaux)

# Also specify in main.cf: cyrus_destination_recipient_limit=1

cyrus     unix  -       n       n       -       -       pipe

  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}

#

# See the Postfix UUCP_README file for configuration details.

#

uucp      unix  -       n       n       -       -       pipe

  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)

#

# Other external delivery methods.

#

ifmail    unix  -       n       n       -       -       pipe

  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)

bsmtp     unix  -       n       n       -       -       pipe

  flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient

#

#Dovecot changes

#

dovecot unix - n n - - pipe

  flags=DRhu user=vmail:mail argv=/usr/lib/dovecot/deliver -d ${recipient}

[/Quote]

dovecot.conf

[Quote]

base_dir = /var/run/dovecot/

protocols = imap pop3 imaps pop3s

ssl_disable = no

disable_plaintext_auth = no

listen=*

syslog_facility = mail

login_greeting = Dovecot ready.

mail_location = maildir:/var/mail/virtual/%d/%n

mail_extra_groups = mail

protocol imap {

}

namespace private {

 prefix = INBOX.

 inbox = yes

}

protocol pop3 {

 pop3_uidl_format = %u-%v

}

protocol lda {

 postmaster_address = postmaster@yourdomain.tld

 auth_socket_path = /var/run/dovecot/auth-master

}

auth default {

 mechanisms = plain

 passdb sql {

  args = /etc/dovecot/dovecot-sql-domain.conf

 }

 userdb sql {

  args = /etc/dovecot/dovecot-sql-domain.conf

 }

 passdb sql {

  args = /etc/dovecot/dovecot-sql-subdomain.conf

 }

 userdb sql {

  args = /etc/dovecot/dovecot-sql-subdomain.conf

 }

 socket listen {

  client {

   path = /var/spool/postfix/private/auth

   mode = 0660

   user = postfix

   group = postfix

  }

  master {

   path = /var/run/dovecot/auth-master

   mode = 0660

   user = vmail

   group = mail

  }

 }

 user = vmail

}

plugin {

}

rbtux · 11-11-2007 03:36 AM

kannst du noch die sql-configs posten? ich sehe hier grad keine fehler...

kannst du mal auth_debug=yes einstellen? (ev, auch auth_debug_passwords)

Threaded Mode \| Linear Mode [Gelöst] Postfix - Main.cf && SMTP-Fehler
Author	Message