Hi again...

... and that's the second HowTo:

HowTo - Setup Nagios.

It describes, how to setup the nagios webinterface under ispCP (that's causing some problems because it has to be run under /var/www.

The configuration of nagios is not covered by this HowTo; but it is covered very well by the default nagios setup and the nagios documentation

As with my other HowTo: Of course, there are mistakes in this HowTo - but I didn't found them already so if you do, please tell me...

Greetings
FeG

FeG Wrote:Hi again...

... and that's the second HowTo:

HowTo - Setup Nagios.

It describes, how to setup the nagios webinterface under ispCP (that's causing some problems because it has to be run under /var/www.

The configuration of nagios is not covered by this HowTo; but it is covered very well by the default nagios setup and the nagios documentation

As with my other HowTo: Of course, there are mistakes in this HowTo - but I didn't found them already so if you do, please tell me...

Greetings
FeG

Not working in my ispcp this HowTo
my verios is -> ispCP Omega 1.0.0 RC2c

Hi,

I am running RC2c, too...

I think I've forgotten something, test this please:

In /etc/nagios2/cgi.cfg, change these values as shown below:


Does this solve the problem?

If not, tell me what error you get..

Greetings
FeG

Edit:
Changed this in the HowTo... hope, that's all I forgot.

Ok thanks
Now .. i need add entry nagios in my DNS(bind) ?

ex:

nagios CNAME domain.com.br.

i have a new erro : )

In nagios, i get same error in all options, cgi configured (www-data/www-data), all inside cgi-bin with permissions

Whoops!

Error: Could not read object configuration data!

Here are some things you should check in order to resolve this error:

1. Verify configuration options using the -v command-line option to check for errors.
2. Check the Nagios log file for messages relating to startup or status data errors.
3. Make sure you've compiled the main program and the CGIs to use the same object data storage options (i.e. default text file or template-based file).


total 24K
drwxr-xr-x 5 www-data www-data 4,0K 2007-10-04 09:54 .
drwxrwx--- 10 vu2003 www-data 4,0K 2007-10-04 09:39 ..
drwxr-xr-x 3 www-data www-data 4,0K 2007-10-04 10:21 cgi-bin
-rw-r--r-- 1 vu2003 vu2003 211 2007-10-04 14:57 .htaccess
drwxr-xr-x 8 www-data www-data 4,0K 2007-10-04 09:45 htdocs
drwxrwx--- 2 www-data www-data 4,0K 2007-10-04 09:39 phptmp

Hi keffer,

as you've already quoted:

keffer Wrote: 1. Verify configuration options using the -v command-line option to check for errors.
2. Check the Nagios log file for messages relating to startup or status data errors.
3. Make sure you've compiled the main program and the CGIs to use the same object data storage options (i.e. default text file or template-based file).

It would be helpful, if you try out these suggestions:

1. Have a look at the configuration files...

2. Try to open nagios so that the error appears and then look into:

3. Is the nagios daemon running?

If you don't find a solution this way, post the tail of nagios.log here...

Greetings,
FeG

FeG Wrote:Hi keffer,

as you've already quoted:

keffer Wrote: 1. Verify configuration options using the -v command-line option to check for errors.
2. Check the Nagios log file for messages relating to startup or status data errors.
3. Make sure you've compiled the main program and the CGIs to use the same object data storage options (i.e. default text file or template-based file).

It would be helpful, if you try out these suggestions:

1. Have a look at the configuration files...

Code:

nagios2 -v /etc/nagios2/nagios.cfg

2. Try to open nagios so that the error appears and then look into:

Code:

tail /var/log/nagios2/nagios.log

3. Is the nagios daemon running?

Code:

ps axxfu | grep nagios

If you don't find a solution this way, post the tail of nagios.log here...

Greetings,
FeG

in nagios2 -v /etc/nagios2/nagios.cfg

Total Warnings: 0
Total Errors: 0

Things look okay - No serious problems were detected during the pre-flight check


in tail /var/log/nagios2/nagios.log

:~# tail /var/log/nagios2/nagios.log
[1191785990] Auto-save of retention data completed successfully.
[1191789590] Auto-save of retention data completed successfully.
[1191793190] Auto-save of retention data completed successfully.
[1191796790] Auto-save of retention data completed successfully.
[1191800390] Auto-save of retention data completed successfully.
[1191800496] Caught SIGTERM, shutting down...
[1191800496] Successfully shutdown... (PID=28725)
[1191800496] Nagios 2.6 starting... (PID=588)
[1191800496] LOG VERSION: 2.0
[1191800496] Finished daemonizing... (New PID=589)


in ps axxfu | grep nagios

:~# ps axxfu | grep nagios
root 943 0.0 0.0 3084 676 pts/0 S+ 18:46 0:00 \_ grep nagios
nagios 589 0.0 0.1 13928 1548 ? SNsl 18:41 0:00 /usr/sbin/nagios2 -d /etc/nagios2/nagios.cfg

FeG Wrote:Hi keffer,

as you've already quoted:

keffer Wrote: 1. Verify configuration options using the -v command-line option to check for errors.
2. Check the Nagios log file for messages relating to startup or status data errors.
3. Make sure you've compiled the main program and the CGIs to use the same object data storage options (i.e. default text file or template-based file).

It would be helpful, if you try out these suggestions:

1. Have a look at the configuration files...

Code:

nagios2 -v /etc/nagios2/nagios.cfg

2. Try to open nagios so that the error appears and then look into:

Code:

tail /var/log/nagios2/nagios.log

3. Is the nagios daemon running?

Code:

ps axxfu | grep nagios

If you don't find a solution this way, post the tail of nagios.log here...

Greetings,
FeG

in nagios2 -v /etc/nagios2/nagios.cfg

Total Warnings: 0
Total Errors: 0

Things look okay - No serious problems were detected during the pre-flight check


in tail /var/log/nagios2/nagios.log after restart service

:~# tail /var/log/nagios2/nagios.log
[1191785990] Auto-save of retention data completed successfully.
[1191789590] Auto-save of retention data completed successfully.
[1191793190] Auto-save of retention data completed successfully.
[1191796790] Auto-save of retention data completed successfully.
[1191800390] Auto-save of retention data completed successfully.
[1191800496] Caught SIGTERM, shutting down...
[1191800496] Successfully shutdown... (PID=28725)
[1191800496] Nagios 2.6 starting... (PID=588)
[1191800496] LOG VERSION: 2.0
[1191800496] Finished daemonizing... (New PID=589)


in ps axxfu | grep nagios

:~# ps axxfu | grep nagios
root 943 0.0 0.0 3084 676 pts/0 S+ 18:46 0:00 \_ grep nagios
nagios 589 0.0 0.1 13928 1548 ? SNsl 18:41 0:00 /usr/sbin/nagios2 -d /etc/nagios2/nagios.cfg

Hi,

keffer Wrote:in tail /var/log/nagios2/nagios.log after restart service
...

Have you opened the nagios-site after copying this logfile? Because normally, nagios should say something about that.. well, should

... but at the moment I've no idea what this could be :/

Greetings
FeG